Victron EasySolar 24/1600/40-16 MPPT 100/50 1300W AC 24V

Easy Solar Multifunction Device: Charge Controller, Inverter, and Battery Charger Combined.

The EasySolar combines an MPPT solar charge controller, an inverter/charger, and AC distribution in a single device. The device is easy to install, requiring minimal wiring.
It is therefore a high-end device that leaves nothing to be desired: The combination of a BlueSolar MPPT charge controller and Multiplus inverter/battery charger is intelligently combined with an AC distribution unit.
All in a compact housing, allowing for quick and clear system setup. This minimizes installation costs and significantly reduces system complexity.
The device is completed by integrated residual current devices and fuses for a total of 4 separate circuits.

The Solar Charge Controller: Blue Solar MPPT 100/50

The integrated charge controller is from Victron's BlueSolar series and guarantees maximum yields with the ultra-fast MPPT process. Especially in cloudy conditions, when light intensity constantly changes, an extremely fast MPPT controller improves energy yield by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.
Information about the solar system can be read out via the VE.Direct port using the Bluetooth Smart Dongle.
Critical partial shading of the solar modules is detected by the MPP controller, and a new operating point is sought, allowing high yields to be achieved even under the most unfavorable circumstances.

MultiPlus 24/1600/40 Inverter and Battery Charger

The Victron Multiplus 24/1600/40 is a combination device consisting of a 1300W sine wave inverter and a battery charger. The smartly integrated battery charger delivers an impressive 40A at 24V, so the batteries can be charged extremely quickly when shore/grid power is available. The sine wave inverter integrated into the Multiplus transforms the 24V DC from the battery into a 230V AC voltage. Thanks to the true sine wave, the voltage quality is perfectly suited even for sensitive electronic devices.

The following features distinguish this high-end device:

• 1300 W continuous AC power, 3000 W peak power
• 24 V battery system voltage
• Pure sine wave inverter, suitable as a UPS
• max. 1400 W PV power
• Charging of the main battery with up to 40 A
• Transfer switch with 16 A

AC Distribution

The AC distribution consists of a residual current device (30 mA/16 A) and four AC outputs, which are protected by two 10 A and two 16 A fuses. One 16 A output is controlled by the AC input: It only switches on when AC power is available.

PowerAssist

The unique PowerAssist technology prevents overloading of the grid or generator power supply by adding power via the inverter whenever necessary.

Unique Software for Solar Systems

Several software programs (assistants) are available to configure the system for various grid-connected or off-grid applications.

Technical Data

Documents & Downloads

• Datasheet
• Manual