EcoFlow LFP Battery Storage 2 kWh for Power Kit

EcoFlow Power Kit Battery 2048 Wh

Please note: A separate connection cable is required for operation with the EcoFlow Power Kit!

Self-heating
The EcoFlow LFP battery is equipped with a charging heating function, which allows operation at low temperatures.
The charging heater is activated automatically when the ambient temperature is below 0 °C (32 °F) and the battery is in charging mode.
Thanks to the integrated automatic preheating function, you can safely use the batteries at temperatures as low as -4 °F (-20 °C).

Stackable and expandable
The EcoFlow LFP battery is a 48V battery system and only supports parallel connection. Up to three EcoFlow LFP batteries can be connected to the EcoFlow Power Hub simultaneously.
The EcoFlow LFP battery power cable has a preset communication signal that allows parallel connected batteries to communicate with each other.
Available in two sizes of 2 kWh as well as 5 kWh, up to three batteries stackable for a capacity of up to 15 kWh.

Safety first
The EcoFlow 5 kWh LFP battery has an integrated replaceable DC 70V/150A fuse, while the 2 kWh LFP battery has an integrated replaceable DC 70V/125A fuse. Under normal operating conditions, there is no risk of the fuse blowing. If an
external short circuit occurs and the battery management system is not protected in time, the fuse will blow immediately to protect the battery.

Advanced BMS protection
The Power Kits' battery management system provides the following protection:

• Single cell overvoltage protection
• Single cell undervoltage protection
• Discharge overcurrent protection
• Discharge overtemperature protection
• Discharge low temperature protection
• Charge overcurrent protection
• Charge overtemperature protection
• Charge low temperature protection

Scope of delivery

• LFP Battery 2 kWh
• LFP Battery Power Cable
• Wall Mount Clamp
• Screws
• User Manual & Warranty Card

Documents & Downloads

• Datasheet