Victron Digital Multi Control 200/200A GX (90° RJ45)

Digital Multi Control 200/200A GX

The Digital Multi Control is used for remote display and adjustment of AC input currents, as well as for switching the Multi or Quattro on and off. It has been designed to seamlessly integrate into the control panel of your boat, vehicle, or home system.

The Digital Multi Control Panel (DMC) is designed to work with all Multi/Quattro devices. This includes single, parallel, and 2-3 phase configurations. Connecting the DMC to your system is easy; in most cases, simply connect the DMC with an RJ45 cable, and no additional commissioning is required.

The DMC is a remote control panel developed for use with all Multis/Quattros and Multi/Quattro systems. This includes single units, parallel operation, and multi-phase operation. It supports both VE.Bus and non-VE.Bus systems. With the DMC, shore power and generator power can be adjusted separately. When used in an extended VE.Bus system, up to four different shore power sources can be configured. In a VE.Bus system, the DMC will automatically select the adjustment ranges to match the connected system.

With the DMC, AC current limits can be changed when the power source is switched externally from shore connection to generator. In normal operation, the shore power limits (corresponding to the knob setting) are transmitted to the connected devices. However, if the screw terminals on the back of the DMC are bridged (short-circuited), the DMC will transmit the preset shore power limit to the devices. This preset limit generally refers to a generator connection. The display on the DMC will then show this. The two screw terminal connections must be routed to an externally operable switch. This will usually be an auxiliary relay of an external transfer switch.

Documents & Downloads

• Manual