Victron Phoenix Inverter 24/1200 230V VE.Direct SCHUKO

Victron Phoenix Inverter 24/1200 230V VE.Direct

Inverters allow you to power household appliances that require 230V/120V AC using 12V, 24V or 48V DC batteries from leisure or automotive applications.

Reliability you can count on

Thanks to proven toroidal transformer technology and full bridge engineering, these inverters are not only short-circuit proof but also protected against overheating – whether due to overload or high ambient temperatures.

Economical in ECO mode

In energy-saving ECO mode, the inverters switch to standby when the load drops below a set value. In this mode, they briefly check the load at regular intervals of 2.5 seconds and remain switched on if it exceeds the threshold.

VE.Direct for convenient configuration

The inverter can be connected to a computer via the VE.Direct port (a VE.Direct to USB cable is required) to make settings and monitor the system.

Fully configurable

You can make numerous settings:

• Alarm thresholds for low battery charge level.
• Shutdown and restart thresholds for low battery voltage.
• Dynamic shutdown depending on load.
• Output voltage between 210V - 245V.
• Selectable frequency of 50 Hz or 60 Hz.
• ECO mode thresholds and sensors.
• Monitoring at the highest level

Monitor input and output voltage, load in percent and any alarms.

High efficiency

With an efficiency of up to 91%, these inverters generate significantly less heat than the industry average and consume less than 0.5 watts after the battery is fully charged – a top value compared to the industry standard.

Overheating protection

If the temperature rises above 50°C, the output current is reduced without the Blue Smart charger failing.

Documents & Downloads

• Datasheet Phoenix 24/1200
• Manual Phoenix 24/1200