Victron VE.Can to CAN-bus BMS Type B Cable 1.8m

Victron VE.Can to CAN-bus BMS Type B Cable (1.8 m) – for GX Devices & CAN-Bus Batteries

With the Victron VE.Can to CAN-bus BMS type B Cable (1.8 m) (MPN ASS030720118), you can connect a third-party CAN-bus-enabled battery to a Victron GX device. Important: This cable corresponds to the Type B pinout and is therefore suitable for several common battery systems. Thanks to clearly labeled connector sides, integration is quick and without improvisation.

Compatibility (Type B)

• LG Chem Resu
• AXIstorage
• BMZ
• Pylontech US2000 / US3000 / UP2500

Installation & Connection

The side labeled “CAN-Bus BMS” is plugged into the battery. The other side, labeled “VE.Can”, is connected either to the VE.Can port of the GX device or to the BMS-Can port. Both port types of a GX device can be configured for use with a third-party CAN-bus battery connected via BMS-CAN. Details on correct configuration can be found in the manual of the battery used.

Your Advantages at a Glance

• Original Victron cable for CAN connection of third-party batteries to the GX device
• Type B: suitable for selected systems such as LG Chem Resu, AXIstorage, BMZ and Pylontech
• 1.8 m length for flexible installation in the technical area
• Labeled connectors (“CAN-Bus BMS” / “VE.Can”) for easy, secure installation
• Clean system integration without makeshift solutions

If you want to reliably integrate a CAN-bus-enabled battery into your Victron GX system, the Victron VE.Can to CAN-bus BMS Type B Cable (1.8 m) is the appropriate, clean solution. Make sure your battery supports the Type B pinout and set up the port configuration on the GX device according to the battery manual – then communication between the battery and the system will remain stable and reliable.