Votronic Battery Charger VAC 45-10/25 Triple - 0664
Votronic Battery Charger VAC 45-10/25 Triple
The devices in the VAC Triple series consist of a VAC mains charger and a VCC charge booster including a Battery Trainer.
Instead of the integrated MPP solar regulator of the VBCS Triple series, these devices feature an intelligent charging current distributor that splits the charging current of the mains charger and supplies the starter battery with a higher charging current of 10 or 15 A. This way, higher loads on the starter battery (entertainment, blue light, siren, etc.) can be buffered, and the vehicle's starting capability can be permanently ensured.
If the high charging current for the starter battery is no longer needed, the charging current distributor also makes it available to the leisure battery.
Mains operation, stationary operation from the external power outlet
Full charging power in the universal wide range of 110 V AC - 230 V AC without switching is available worldwide, even with large deviations in the mains supply (under/overvoltage, sine wave, frequency).
Efficient charging of the leisure battery and supply of 12 V consumers from the mains
as well as a charging current distributor with a second charging branch of 12 V/10-15 A for charging the starter battery and supplying 12 V vehicle consumers from the mains - with trickle charging during long periods of inactivity.
Thanks to the multi-stage long-term charging characteristics, the device can be continuously connected to the mains (during use, winter break) and keep the batteries fit.
The VAC Triple series corresponds to the VOTRONIC individual devices in terms of quality, equipment, and functions and is characterized by its particularly compact and lightweight design. The devices contribute significantly to cost reduction and help to save valuable space in the motorhome. Acquisition, installation, and connection wiring are reduced to a minimum, thus saving additional valuable resources.
Product features:
- Continuous, fully automatic battery charging
- Now NEW with integrated CI-BUS interface
- Integrated intelligent charging current distributor
- High operational reliability
- Fast, battery-friendly charging, integrated battery care
- Full charging power worldwide, 8 charging curves for acid, gel, AGM, and LiFePO4 batteries
- Temperature sensor 825 included
- Robust technology and compact design
- Easy installation, short cable runs
- Optional: Plug and Play display and control panel LCD-Charge Control S
Technical Data
| Mains Operation | |
|---|---|
| Nominal Operating Voltage (AC) in [V] | 110 to 230 / 45 - 65 Hz worldwide |
| Operating Voltage Range (AC) in [V] | 90 - 270 (full charging power) |
| Max. Power Consumption (AC) in [W] | 610 |
| Charging Power Leisure/Starter Battery max. [A] | 35.0 / 10.0 |
| Switching output for engine start inhibit | yes |
| Power Limit Function | yes |
| 12 V / 12 V B2B Charger Operation | |
| Charging Power Leisure Battery max. [A] | 45 |
| Automatic Activation D+ / Ignition | yes |
| Starter Battery/Alternator Voltage Range (Euro 6) in [V] / max. Current [A] | 10.5 - 16.5 / 63 |
| Limit II max. Current Limitation (adjustable) in [A] | 48 |
| Starter Battery | |
| Nominal Voltage [V] / Min. Recommended Capacity [Ah] | 12 / > 80 |
| Leisure Battery, IU1oU2oU3 | |
| Nominal Voltage Lead / LiFePO4 [V] | 12 / 12.8 - 13.3 |
| Battery Capacity, adjustable [Ah] | 68 - 420 |
| Device Installation Position | any |
| Temperature Range [°C] | -20 to +45 |
| Protection Class/Degree | IP 21 |
| Dimensions (WxHxD) in [mm] - Dimensions incl. mounting flanges, without connections | 217 x 85 x 250 |
| Weight [g] | 2,800 |
| Ambient Conditions: | Humidity: max. 95% relative humidity, non-condensing |
| Scope of Delivery: | Mains cable, 1 temperature sensor, operating manual |