Votronic Solar-Data-Extender 3-in-1 - 1440
Votronic Solar-Data-Extender 3-in-1 - 1440
SKU:WS303-1096
Couldn't load pickup availability
The Solar Data Extender combines data from up to three solar controllers so that they can be displayed on a single display. The familiar LCD display can still be used. It is compatible with the following devices
Mounting and Connection
The Solar Data Extender can be retrofitted at any time. It has three independent inputs (IN1, IN2, IN3). The combined signals are provided via the output (OUT). A solar display (e.g. LCD Solar Computer S) can be connected there.
It is connected between the Votronic solar charge controller and the solar display (e.g. LCD Solar Computer S) using the modular cables supplied. Input IN1 must always be connected, as this provides the power supply for the device.
Technical Data Data Extender 3 in 1
| Nominal voltage (supply via connected devices) | 12 and 24 |
| Operating voltage range [V] | 8 - 32 |
| Current consumption in standby, typical [mA] | 0.7 |
| Current consumption in operation, typical [mA] | 10 |
| Dimensions (WxHxD) in [mm] | 75 x 47 x 24 |
| Weight in [g] | 37 |
| Test mark | CE, E-test (EMC/vehicle directive) |
| Ambient conditions, humidity: max. 95% relative humidity, non-condensing | |
| Scope of delivery: 3 pcs. control cable 6-pin, 0.5 m long, operating instructions |
Documents & Downloads
Share
